Carbon Cleaner & Flushing Fluid

Carbon Cleaner & Flushing Fluid

A specially formulated solution to dissolve carbon deposits and other residue buildup in combustion chambers, perfectly restoring engine performance and optimizing fuel consumption. Easy and safe to use for vehicles equipped with or without a catalytic converter.

USP :
  • Improve engine performance.
  • Save fuel.

HOW TO USE :
  1. Shake well before use
  2. Spray with extension tube directly into the combustion chamber through the spark plug hole
  3. Let stand for about 3-5 minutes. Suction fluid in the combustion chamber with Otogard Vacuum System
  4. Pour the flushing liquid in the combustion chamber through the spark plug hole, use Otogard 5. Vacuum System to clean it again.
  5. Should be applied in vehicles in hot engine conditions

Volume : Carbon Cleaner 350 ml, Flushing Fluid 100 ml
Injector & Engine Cleaner

Injector & Engine Cleaner

Cleans varnish, residue buildup, carbon deposits, and other dirt in the throttle body and intake manifold perfectly. It restores engine performance and improves fuel efficiency. Easy and safe to use for vehicles equipped with or without a catalytic converter.

USP :
  • Increases engine power & performance.
  • Saves fuel by improving fuel efficiency.

HOW TO USE :
  1. Shake the can thoroughly before use.
  2. Spray onto the designated area in a circular motion.
  3. Use the extension tube to clean detailed parts.
  4. Repeat the application if necessary.

Volume : 250 ml, 350 ml
New Injector Cleaner Diesel

New Injector Cleaner Diesel

Effectively clean and prevent deposits buildup in the entire fuel injector system. Formulated through a research and testing process in an internationally verified laboratory for 20 years, this product guarantees proven quality and reliability.

USP :
  • Restore engine performance.
  • Improve fuel efficiency.
  • Reduce harmful emissions.

HOW TO USE :
  1. Pour contents into fuel tank or use cleaning tools injection system with ratio 1:20 liter.

Volume : 80 ml, 250 ml, 350 ml
Engine Flush

Engine Flush

It has a powerful formula to neutralize rust-causing acids, protect the film produced by oil, and remove scale deposits on metal and engine surfaces to optimize fuel consumption, improve efficiency, extend engine life while reducing emissions that make vehicles more environmentally friendly. It is extremely important that the engine be cleaned out thoroughly before refilling new motor oil.

Formulated through a research and testing process in an internationally verified laboratory for 20 years, this product guarantees proven quality and reliability.


USP :
  • Improve engine performance.
  • Extend engine life.

HOW TO USE :
  1. Add the entire bottle of Engine Flush to engine oil
  2. The engine run for 3-5 minutes at idle to circulate flush
  3. Drain crankcase and remove the oil filter
  4. Replace drain plug and install the new oil filter
  5. Refill crankcase with new motor oil

Volume : 80 ml, 250 ml
Brake Fluid Dot 3

Brake Fluid Dot 3

Brake Fluid Dot 3, motor vehicle brake fluid with specifications exceeding DOT 3 standards. Suitable for ABS, disc and drum brake systems. Follow vehicle instructions when adding fluid. Keep brake fluid clean, away from contamination by dust, water, fuel or other materials.

Specially formulated for safety and braking power, suitable for all types of vehicles and trucks. Meets JIS K2233 BF-3 standard. FMVSS No. 116 DOT 3, SAE J1703 and SNI No. 2769: 2012 DOT 3.
Equilibrium boiling point (ERBP) 255oC.
Boiling point after water absorption (Wet ERBP) 152oC.

Formulated through a research and testing process in an internationally verified laboratory for 20 years, this product guarantees proven quality and reliability.


USP :
  • Longer lasting higher due to high temperature synthetic formula.
  • Provides driving safety.

HOW TO USE :
  1. Clean the entire surface around and on the brake fluid reservoir cap.
  2. Open the reservoir cap and fill to the maximum level.
  3. Check the oil level every month.
  4. Do not exceed the recommended filling level.

Volume : 250 ml
Chain Lube

Chain Lube

A chain lubricant designed to improve the performance and lifespan of your bike’s chain.

USP :
  • Strong lubrication power.
  • Protects against corrosion and rust.

HOW TO USE :
  1. Clean the chain from dirt and dust with a clean cloth.
  2. Shake the bottle before use.
  3. Apply the lubricant evenly to the chain.
  4. Allow the lubricant to absorb.

Volume : 100 ml